Controller Vibration Tester
Free Online Haptic Feedback & Rumble Test Tool
Test your gamepad's vibration motors, haptic feedback, and rumble features. Works with PS5, PS4, Xbox, Switch Pro, and PC controllers. No download required.
Vibration Test
Connect your controller and test the vibration motors
Left Motor (Heavy)
IdleRight Motor (Light)
IdleBoth Motors Combined
Vibration Patterns
Test different vibration patterns to fully diagnose your controller's haptic capabilities
Test Results
How to Use the Vibration Tester
Follow these simple steps to test your controller's vibration motors
Connect Controller
Connect your gamepad via USB cable or Bluetooth. Ensure it's properly paired with your device.
Detect Controller
Click "Detect Controller" and press any button on your gamepad to activate it in the browser.
Adjust Intensity
Use the sliders to set vibration intensity for each motor or both combined.
Test Motors
Click test buttons to activate individual motors or try preset patterns to fully test haptics.
Understanding Controller Vibration
Learn about how vibration motors work in modern game controllers
Eccentric Rotating Mass (ERM)
Traditional rumble motors use an off-center weight that spins to create vibration. Found in most controllers, these provide strong, broad feedback.
- Heavy motor (left) - Low frequency rumble
- Light motor (right) - High frequency buzz
- Combined creates complex sensations
Linear Resonant Actuators (LRA)
Advanced haptic motors that provide precise, nuanced feedback. Used in PS5 DualSense and newer controllers for immersive experiences.
- Faster response time
- More precise vibration control
- Lower power consumption
Haptic Feedback Technology
Modern controllers combine multiple actuators with software to simulate realistic textures, impacts, and environmental effects.
- Texture simulation (grass, sand, ice)
- Weapon recoil and impact feedback
- Environmental effects (rain, wind)
Controller Compatibility
This vibration tester works with most modern game controllers
PlayStation
- PS5 DualSense
- PS4 DualShock 4
- PS3 DualShock 3
Xbox
- Xbox Series X|S
- Xbox One
- Xbox 360
Nintendo
- Switch Pro Controller
- Joy-Con (via adapter)
PC Controllers
- Logitech Gamepads
- Steam Controller
- Generic XInput
Troubleshooting Vibration Issues
Common problems and solutions for controller vibration
No Vibration at All
Possible Causes:
- Vibration disabled in system settings
- Browser doesn't support Gamepad API vibration
- Controller not properly connected
- Dead or disconnected vibration motors
Solutions:
- Enable vibration in controller/system settings
- Use Chrome or Edge browser (best support)
- Try USB connection instead of Bluetooth
- Test with a game that uses vibration
Weak Vibration
Possible Causes:
- Low battery level
- Worn out motors
- Intensity settings too low
- Loose internal connections
Solutions:
- Fully charge the controller
- Increase intensity to maximum
- Check system vibration settings
- Consider motor replacement if persistent
One Motor Not Working
Possible Causes:
- Motor wire disconnected internally
- Motor burned out from overuse
- Physical damage to motor
- Controller board issue
Solutions:
- Open controller and check connections
- Replace the faulty motor
- Contact manufacturer for warranty
- Professional repair service
Unusual Noise/Rattling
Possible Causes:
- Loose weight on motor shaft
- Foreign debris inside controller
- Worn motor bearings
- Loose internal screws
Solutions:
- Carefully open and inspect
- Remove any debris
- Tighten loose components
- Replace worn motors
Frequently Asked Questions
Common questions about controller vibration testing
Why doesn't my controller vibrate in the browser?
+The Gamepad API vibration feature (vibrationActuator) has limited browser support. Chrome and Edge provide the best support. Firefox has partial support, and Safari doesn't support it. Also ensure vibration is enabled in your system/controller settings and try using a USB connection for better reliability.
What's the difference between left and right motor?
+Most controllers have two rumble motors: the left motor (heavy/strong) creates low-frequency, powerful vibrations for big impacts like explosions. The right motor (light/weak) creates high-frequency, subtle vibrations for things like gunfire or engine rumble. Together they create varied haptic feedback.
Can vibration testing damage my controller?
+Normal vibration testing won't damage your controller. Motors are designed for continuous use during gaming. However, running motors at maximum intensity for extended periods (many hours) could accelerate wear. Short tests and pattern checks are completely safe.
Why does my PS5 DualSense feel different than other controllers?
+The PS5 DualSense uses advanced haptic motors (Linear Resonant Actuators) instead of traditional rumble motors. These provide more nuanced feedback but may feel different in basic vibration tests. Full haptic features require game-specific implementation and aren't fully accessible via browser APIs.
How do I fix a controller with no vibration?
+First, check system settings to ensure vibration is enabled. Try the controller with a game known to use vibration. If it still doesn't work: check if the motors are disconnected (requires opening controller), the motors may be burned out and need replacement, or there could be a board-level issue requiring professional repair.
Does this tester work on mobile devices?
+Yes, if your mobile device supports the Gamepad API and you can connect a controller via Bluetooth or USB OTG. Android devices with Chrome generally work well. iOS has limited gamepad vibration support. For best results, use a desktop or laptop computer with Chrome browser.